#Rejex vs collinite drivers
#Rejex vs collinite full

Some guys put a coat or two of good paste wax ONTOP of Rejex to give them that deep/wet look. It will make the car shiny like wax, but not quite have the same 'depth' that a good wax will give you. Suprizingly both products were very easy to apply - I used a foam applicator for the insulator wax and a plain old terrycloth wax applicator pad.

#Rejex vs collinite drivers

The Insulator wax got applied to the front bumper, hood, drivers side of the car, rear bumper and backside of the trunklid. If you do your wheels, brake dust will never stick again. The 476s got applied to the trunk (top), roof and passenger side of the car. Opti Coat is supposed to last several years, but what if it is not washed. Some say it does last as long as advertised. Some people say it lasts barely as long as advertised. It wipes on and buffs off really, really easy. A few products have caught my eye: 1) Rejex 2) Opti Coat 3) Simoniz Glasscoat Seems Rejex is very resistant but does not last long. Then apply 2 coats of RejeX with 12 hour cure time inbetween. Even Meguiars Ultimate does a decent job, but when you can get Duragloss for under 15 bucks, it is what I keep going back to. If you use it, you need to wash your car really well with Dawn soap/Simple Green first to get rid of all wax. Finish Kare 1000, Collinite 476, and 845 (not quite as durable, but easier to use) are also good options. Buy Rejex Corrosion Technologies 61001 (12 fl oz) High Gloss Finish That Protects for All Vehicles Synthetic Paint and Surface Sealant Lasts 2X. If you use it, you need to wash your car really well with Dawn soap/Simple Green first to get rid of all wax. If I was you, I'd get away from wax all together and just use RejeX. If I was you, I'd get away from wax all together and just use RejeX. Now a high quality liquid may perform better than junk paste.but most wax companies make liquid wax because their customers complain about how hard it is to use paste. Because it is non-abrasive, RejeX is safe to use on glass, fiberglass, Plexiglas. RejeX is effective on all non-porous hard surfaces. Compounding products are designed to take off layers of oxidized paint with solvents and abrasives.

#Rejex vs collinite full

And lasts, I put it on the front of my silverado rst and after a full year no bugs stick and it s still slick to the touch. RejeX is non-abrasive, and therefore it will not compound or revitalize dead oxidized painted surfaces. Liquid wax is just a watered down version of the paste using surfactants, solvents, etc. Collinite 845 is good wax but Rejex goes on and off easier with same shine. Paste is always better, if you're looking at performance.